Octomask Scuba Mask Review

By
Andrew Goad
Staff writer at DIVEIN.com
Andy has been an avid diver for many years, honing his skills and passion for the underwater world. As an instructor, scientific diver, and technical diver,...
Rebecca Strauss
Editor at DIVEIN.com
Rebecca has been an avid traveler and scuba diver for many years. She began her editorial career by updating travel guides, which took her all over...
Octomask frameless mask with a GoPro mounted on top, resting on a wooden dock above the water
The Octomask has a soft skirt and a wide field of view. The camera weight does not disturb the balance
Front view of the Octomask with a GoPro Hero 11 clipped into its top mount
The Octomask with attached GoPro Hero 11
Frameless Octomask seen head on with a bare camera mount above its single lens
The Octomask frameless mask
Octomask resting on the black quick-dry mesh bag it ships with
The Octomask with the quick-dry mesh bag
Green moray eel peering out from a reef crevice, filmed on the GoPro mounted to the Octomask
Footage taken using the GoPro Hero 11 attached to the Octomask
Our tester underwater in a murky quarry wearing the Octomask with a GoPro mounted on top
Trying the Octomask in the cold quarry
Octomask with a GoPro in its dive housing mounted on top, set on a dock rail above the water
Octomask partnered with a GoPro Hero 11
Close-up of the embedded nut and thumbscrew that lock the camera mount onto the Octomask
Imbedded nut housing
Octomask sitting on a dock rail with its camera mount empty, water behind
Octomask prior to connecting a camera
Our tester underwater wearing the Octomask with the GoPro housing sitting above the lens
The Octomask has a great fit, and the added weight of a camera is negligible
GoPro Hero 11 sealed inside its clear underwater housing
GoPro Hero 11 with underwater housing
Octomask with a GoPro Hero 11 attached on top, resting on its black mesh bag
GoPro Hero 11 attached to the Octomask

Where to buy

As divers, we carry a lot of gear, and a lot of times that gear is in our hands. So, unless we are an octopus with eight arms, something gets left to the side. DSMBs, reels, lights, SPGs, computers, inflator hoses, and tank bangers occupy much of our dive concentration, so unless you’re a professional photographer, you may use your camera only when nothing else is occupying your hands. The Octomask solves this problem.

By putting your GoPro camera directly on your mask, the Octomask allows you to film exactly what you’re looking at—hands free. Built with top-end engineering, the Octomask can compete with any mask on the market with the added functionality of a camera attachment.

Let’s dive in and take a closer look at the Octomask.

About this review

To help you find a Scuba Mask that will fit your needs, we’ve tested, researched, and reviewed the best ones available today.
We test both in the water, diving in various conditions - and in our lab - so we can give you accurate answers on quality, performance, and the overall value.

Read about our test of Scuba Masks

Recommended in: Scuba Mask

Look mom, no hands….

Our tester underwater in a murky quarry wearing the Octomask with a GoPro mounted on top
Octomask with a GoPro in its dive housing mounted on top, set on a dock rail above the water
Close-up of the embedded nut and thumbscrew that lock the camera mount onto the Octomask

The model I used for testing was the frameless version with the black skirt. It looks and feels just like a traditional mask. Setting up the mask is the same as for any new mask, a simple toothpaste scrub, and it was ready to dive.

During the testing portion of this review I dived the Octomask in both the pool and the ocean, and both with and without a GoPro Hero 11 attached. Divining without a camera, the Octomask felt as any other mask would feel. And with the camera attached the Octomask felt the same.

With a little practice you will be able to take great videos and photos while diving. I really liked using it while teaching underwater skills to my students. Recording while face to face and then showing them the video added a level of instruction I wasn’t using before.

The negative aspects of this mask stem more from user preferences and diving habits. For me, and many other divers, diving in a trim position means we don’t necessarily turn our whole head to see our surroundings. We simply give a slight turn and move our eyes. It’s not a negative, per se, but it is something you would have to get used to while using the Octomask.

Also, how much you’ll enjoy the Octomask depends on how familiar you are with your camera. Because it sits on top of the mask, reaching up to push buttons became confusing. I asked myself if I was on video or photo multiple times during each dive. Again, user knowledge and preference comes into play.

The only other potential negative is the shape of the nose pocket. It is large, which could either be great or have no effect for you. But for me, the frame of the nose pocket extends farther into the lens than I prefer, and it tends to push on my brow ridge.


Spec Breakdowns & Features

Octomask sitting on a dock rail with its camera mount empty, water behind
Our tester underwater wearing the Octomask with the GoPro housing sitting above the lens

The Octomask comes in three separate models to fit any diver’s needs, including frameless, framed, and freediving. All three models are considered “low-volume” and are easy to clear. The frameless model is compatible with prescription inserts, and all three are made with dual safety-tempered lenses.

The skirt is made of comfortable, high-quality silicone, and the frameless and framed models come in black, blue, and clear. The nut that connects the bolt to the camera housing is embedded, and won’t accidentally get lost while unscrewing. All models come standard with a quick drying travel bag.


Accessories

GoPro Hero 11 sealed inside its clear underwater housing
Octomask with a GoPro Hero 11 attached on top, resting on its black mesh bag

The Octomask is compatible with any GoPro camera housed in a GoPro waterproof case. It can also be used with any underwater camera with a GoPro mount.


Price/Quality Ratio

The Octomask currently costs roughly half the price of high-end masks on the market, but it doesn’t feel cheap. The silicone is as soft as any mask I have ever tried, with the exception of a select few, and the dual lens tempered glass is as tough as any.

Do we recommend Octomask?

We do recommend the Octomask. For the price, you get a quality mask. Add in the ability to film your dives or your training activities, and this is a winner. Just review your camera functions before you use it.

Specs & Features

Frame Frameless, framed, freediving
Glass Dual
Dimensions 5.61 x 7.3 x 2.5 inches
Volume Low volume
Corrective lens compatible Yes
Lens treatment
Skirt Matte silicone, black, blue, clear
Subscribe
Notify of
guest
0 Comments