Hollis M1 Scuba Mask Review

By
Andrew Goad
Staff writer at DIVEIN.com
Andy has been an avid diver for many years, honing his skills and passion for the underwater world. As an instructor, scientific diver, and technical diver,...
Rebecca Strauss
Editor at DIVEIN.com
Rebecca has been an avid traveler and scuba diver for many years. She began her editorial career by updating travel guides, which took her all over...
Hollis M1 frameless mask with a red logo, beaded with water on a wooden rail above the sea
The Hollis M1 mask
Side view of the wet Hollis M1 mask on a wooden railing above green reed-lined water
The low-profile Hollis M1 features a large nose pocket and quick-adjust buckles, making it easy to find the perfect fit.
Straight-on view of our tester underwater wearing the Hollis M1 in green coastal water
Straight-on view of the Hollis M1
Side profile of our tester underwater in the Hollis M1 with the mask strap across his head
Side view of the Hollis M1
Our tester holding the Hollis M1 frameless mask on a dive boat with rigged tanks behind
There is very little to the M1 in the hand: one lens bonded to the skirt, no frame, and a profile flat enough to vanish into a pile of kit.
Hollis M1 mask half buried in beach sand with the sea blurred behind it
Perfect for those sunny dive days
Hollis M1 mask lying on submerged wooden planks in green water
The Hollis M1 at 20 feet deep (6 m)
Our tester holding the Hollis M1 by its adjustable strap on the boat before a dive
The quick-adjust buckles sit right on the skirt, so the strap can be tightened one-handed while the mask is already on your face.
DIVEIN tester underwater in the Hollis M1, breathing from his regulator in clear blue water
One big pane and nothing else. No frame edge and no bridge across the middle, which is exactly what divers who hate a split view are paying for.
Side view of our tester underwater in the Hollis M1, the mask sitting flat against his face
Seen side-on the frameless build makes its case: the lens sits almost on the face, which keeps internal volume low and clearing quick.
DIVEIN tester floating at the surface in the Hollis M1 with the dive boat and an island behind
Nothing on this mask is decorative, and that is the argument for it. You are buying a seal and a lens, not styling.

Hollis is world-renowned for its regulators, BCDs, and rebreathers, so to see so much detail on a small piece of equipment like the Hollis M1 puts them even higher on the list of manufacturers you should buy from.

Clear vision is the most important factor when it comes to ranking masks, and the M1 offers it in abundance. Wearers will love the extremely wide, panoramic field of view and a lens made from Saint-Gobain glass, which reduces green tint and produces a higher light transmission.

This is one of the most comfortable masks on the market, delivering a silky smooth feeling from a feathered, double-edged silicone skirt, easily adjustable buckles, and a wide split strap.

Let’s dive in and take a closer look at the Hollis M1 mask.

About this review

To help you find a Scuba Mask that will fit your needs, we’ve tested, researched, and reviewed the best ones available today.
We test both in the water, diving in various conditions - and in our lab - so we can give you accurate answers on quality, performance, and the overall value.

Read about our test of Scuba Masks

Recommended in: Scuba Mask

Things we like:

  • Great feel to the silicone
  • Larger nose pocket
  • Low iron-content tempered glass reduces reflection

Things we don't like:

  • Only one color
  • Nose bridge runs a little high
  • No swivel buckles on strap

Silky Smooth Comfort

Straight-on view of our tester underwater wearing the Hollis M1 in green coastal water
Side profile of our tester underwater in the Hollis M1 with the mask strap across his head

When I first pulled the Hollis M1 out of the box I was impressed with the sleek lines and the overall look. Call me old-school, but I’m a big fan of black masks with a black skirt. For some reason it just looks “professional” to me.

Wearing it in the pool for the first time to ensure a solid seal, I noticed the skirt felt a little different than most masks. It’s silicone—like 99% of the masks on the market—but it had a softer feel than I was used to. It’s hard to put it into words, but it felt more pliable and more cushioned than any mask I’ve worn.

The seal is great, even with the bad mustache I’ve been working on. I don’t have a wide face, but I would consider it somewhat flat, with a wide, but not long, nose, and a bit of a pronounced brow ridge. Think of the drawing of cave people in your high school biology class. What I’m saying is if this mask fits my face, there is a great chance it’ll fit yours.

I took the Hollis M1 pretty deep to test the squeeze. Low-volume masks tend to squeeze fast due to the reduced space, but this mask didn’t squeeze any more than a larger mask. Hollis itself calls this a good choice for a backup mask on its website, but after diving this mask for a while, I switched out the M1’s strap and added my aftermarket neoprene strap. Now I dive with it quite a bit as my primary mask.

The M1 is frameless and small enough to wear without worrying about getting in the way of a hood. It’s soft enough that you can wear it comfortably on multiple dives each day and, even with no swivel buckles for the strap, it’s easy to adjust. The M1 became one of my personal favorite masks of the year.

In general, Hollis has a reputation for making great equipment. If you’re on the hunt for more gear, check out our review of the highly-rated 200LX DCS regulator.


Spec Breakdown & Features

Measuring 4 x 2 x 3 inches and weighing just over 1/4 pound, the Hollis M1 is one of the smallest and lightest masks we tested. Clear vision is the main goal of a quality mask, and the Saint-Gobain tempered glass delivers. This fine variety of soda-lime plate glass is produced by some of the oldest glass makers in the Saint-Gobain region of France.

Not only does the process used in the production of the glass make the mask clearer, it also reduces iron in the glass, meaning it lessens the reflections. The lenses are also treated to reduce green tint.

A single-lens, frameless mask, the M1 will fit a variety of faces. It cannot be fitted with prescription inserts, however. No swivel on the mask strap is a slight knock, but it is barely noticeable. And while the buckle is small, it is easy to adjust, both on dry land and while in the water.

Accessories

Hollis does not produce snorkels, but they do make mask straps, both neoprene and silicone. They also manufacture some neat diving accessories such as reels, line cutters, marker buoys, clip-on pockets, and DIN-to-yoke converters.

Price/Quality Ratio

Hollis M1 mask lying on submerged wooden planks in green water
Hollis M1 mask half buried in beach sand with the sea blurred behind it

The Hollis M1 is a relatively affordable mask, falling somewhere in the mid-range when it comes to pricing. You’ll spend more than if you pulled one off the shelf at a sporting goods store, but not as much as you would on a high-end mask.

It is definitely priced like a backup mask, even if you don’t use it that way. And with the quality it delivers, The M1 lands high on the price-to-quality ratio. I would even go so far as to say the M1 can compete with any high-priced mask on the market.


Do We Recommend the Hollis M1 Mask?

We do recommend the Hollis M1, either as an everyday mask or backup for those who need one. An extremely soft double-edged, feathered skirt and low volume make clearing easy. The M1 also features a wide field of vision and will fit a variety of face shapes. Saint-Gobain tempered glass reduces glare and green tint, and a larger nose pocket makes equalizing a breeze.

Specs & Features

Dimensions 4 x 2 x 3 inches (4.8 oz)
Framed or frameless Frameless
Lens (dual or single) Single
Skirt Double feathered-edge silicone skirt
Lens treatment Saint-Gobain tempered glass with lower iron content reduces green tint
Volume Low
Corrective lens compatible No
Subscribe
Notify of
guest
0 Comments