Pinpoint Waterproof Metal Detector Probe with LED Indicator

This is a handheld pinpointer probe from FYSMY, listed as fully waterproof, with a 360 degree sensing tip and three ways of telling you it has found something. A pinpointer is the second tool in a detectorist's kit: the full-size machine says the target is somewhere in this patch of sand, and the probe says it is a few inches down and slightly left.

Who this suits

Beachcombers and hobby detectorists who already own a full-size machine and are tired of digging a wide hole to find one coin. The probe is what turns a spade-width excavation into a single small plug.

It also suits anyone hunting where it is wet, since the housing is listed as fully waterproof. Low-tide sand, a river bank, the shallows by a slipway.

Skip it if you do not already own a detector. A pinpointer narrows a target down, it does not find one across open ground. And skip it if you want to take it on a dive, for reasons in the next section.

A 360 degree tip, and why that saves time

The listed search coverage is 360 degrees, meaning the probe reads a target from any side rather than only off the flat of its face.

That sounds like a detail and is not. A face-only probe makes you rotate the thing in the hole until the signal comes back, which is fiddly with a gloved hand in cold water and worse when the hole is filling in behind you. A tip that reads all round lets you sweep the sides of the hole in one pass.

Three alerts at once

The probe signals a target three ways together: vibration, an audible beep and an LED indicator.

Each one covers where another fails. A beep is lost in surf noise and wind. An LED is lost in bright sun on white sand. Vibration works through a glove and works in both. Having all three means the probe stays usable in the conditions where a beach hunter actually stands, rather than only in a quiet garden.

Fully waterproof, and what that does not tell you

The listing describes the housing as fully waterproof. That is a phrase, not a measured figure, and the difference matters.

There is no stated submersion depth, no ingress protection code, no detection range and no sensitivity figure anywhere in the product data. Without a depth number, treat it as a tool for wet sand, rain and shallow water rather than something to carry down on a dive. If you need it to work at depth, get a depth figure from the seller in writing first.

What comes in the box, and which version this is

The package is listed as the pinpointer plus 2 x 9V batteries, so a spare is included and you are not buying an odd cell separately. It is a 9V machine, which is the common size for probes and easy to replace anywhere.

The only finish listed is black, and it is sold under the Gold Hunter product line. No other variant is listed against this page.

The bottom line

For a beach or river hunter who already swings a full-size detector, this is the tool that stops you digging wide. The all-round tip and the three-way alert are the two things that actually matter on a pinpointer, and both are here.

It is not a detector, and it is not a dive tool. Without a stated depth or a sensitivity figure, buy it for wet ground and shallow water, and treat anything deeper as unproven.

Specifications