Bare Evoke 7mm Women’s Full Wetsuit

Bare 7mm Evoke Women's Full Wetsuit: Cold-Water Scuba Suit Built for Women's Fit and Warmth

The Bare Evoke is a 7mm full-length wetsuit designed specifically for women, built to handle cooler water temperatures during recreational scuba diving.

If you regularly dive in water that demands serious thermal protection, and you have struggled to find a suit that actually fits a woman's body rather than a scaled-down men's pattern, the Evoke is worth a close look.

Who This Suit Is For

The Evoke is aimed at recreational female divers diving in cold to temperate water. At 7mm thickness, this is not a warm-water suit. It is built for conditions where you need real insulation: think cold lakes, higher-latitude ocean sites, or deep dives where the thermocline drops the temperature significantly.

If you dive in water above roughly 24°C (75°F) regularly, a 7mm suit will likely feel uncomfortably hot on the surface and during entry. A 3mm or 5mm suit would serve you better in those conditions. The Evoke is for divers who run cold, dive deep, or spend extended time in the water in cooler environments.

The Thermal Technology: What OMNIRED Actually Does

Bare built the Evoke around what they call OMNIRED Infrared Technology. The idea is straightforward: your body constantly loses heat outward through your skin. OMNIRED embeds 13 thermo-reactive minerals directly into the fabric. Those minerals absorb the heat your body radiates outward, convert it into infrared energy, and reflect it back toward you.

The practical result is that less of your body heat escapes into the surrounding water. Bare states this has been lab-tested and positions it as the warmest women's dive wetsuit they make, falling under their Ultrawarmth product category.

The fabric is also hydrophobic, meaning it resists water absorption and dries faster than standard neoprene. It carries anti-microbial treatment to resist the bacteria and odor that can build up in a suit you use frequently.

Fit: Designed by Women, for Women

Bare's all-female design team developed the Evoke, and the fit philosophy draws from activewear and yoga apparel rather than simply adjusting a unisex pattern. The suit uses an anatomically correct, three-dimensional cut that follows the natural curves of a woman's body.

This matters more than it might sound. A suit that bunches, pulls, or gaps at the shoulders, chest, or hips forces you to fight the neoprene with every movement. A well-fitted suit moves with you.

The neoprene itself is described as full-stretch, and the underarms are seamless. Seams under the arm are one of the most common comfort complaints in wetsuits, because stitching in that area chafes during fin kicks and arm strokes. Removing it entirely is a meaningful design choice.

Getting In and Out

Donning a 7mm suit is genuinely harder than pulling on a thinner one. Bare addresses this with two zipper systems:

• Back zipper: A 21-inch (53.34 cm) G-lock 2 zipper with an offset tooth design. The offset teeth help seal against water entry, and the full-length puller has a silicone-grip print so you can grab it even with cold or gloved hands. There is also a grip tab at the zipper base to help when pulling it down.
• Ankle zippers: 10-inch (25.4 cm) heavy-duty zippers at each ankle. These make sliding your feet through the leg openings significantly easier, which matters when the neoprene is stiff in cold air on a boat deck.

The back zipper includes a skin-to-skin double internal sealing zipper flap. This is a layer of neoprene or smooth-skin material behind the zipper that presses against your skin, blocking the channel that water would otherwise travel through. Combined with the offset tooth design, it reduces flushing at the zipper, which is one of the main ways a suit loses warmth.

Collar and Neck Seal

The neck is one of the areas where cold water most easily enters a suit. The Evoke uses a 4mm Glideskin collar (a smooth, skin-side neoprene finish that seals against your neck without a rough texture) paired with a hook-and-loop adjustable 360-degree neck seal.

The hook-and-loop closure lets you dial in the fit around your neck rather than relying on a fixed collar size. Bare includes a booklet-style cover over the hook-and-loop section to prevent it from catching on the suit fabric and causing pilling or snags over time. It is a small detail, but one that extends the life of the suit.

Durability Details

All seams on the Evoke are glued and stitched. Gluing alone can delaminate over time with heavy use. Stitching alone leaves needle holes that allow water seepage. Combining both gives you a seam that is stronger and more water-resistant than either method on its own.

The knees are reinforced with Armor Flex 2.0 kneepads, described as three-dimensional, flexible, and abrasion-resistant. If you kneel on rocky or coral-covered surfaces, or on a boat deck, knee reinforcement extends the life of the suit considerably.

A spine pad is included for comfort along the back, and the material is Nylon 2 neoprene construction throughout.

One Honest Note

Bare describes this as the warmest women's dive wetsuit on the market. That is a strong claim, and it is Bare's own positioning. What is verifiable is the OMNIRED technology, the 7mm thickness, the glued-and-stitched construction, and the sealing features, all of which are genuinely designed to retain heat. Whether it outperforms every competing suit in real-world conditions is something no product page can prove for your specific body and diving conditions.

What you can take at face value is that Bare built this suit around cold-water performance and women's-specific fit, and the construction details support that intent throughout.