Bare 7/5mm Ultrawarmth Omnired Dry Hood — XS (X-Small)

A 7/5 mm hood designed around a drysuit collar

This BARE Ultrawarmth Omnired dry hood combines an ELASTEK stretch exterior with a high-loft OMNIRED lining. The selected listing identifies it as the 7/5 mm version in XS. Its face and neck areas, hood vent and collar arrangement are as important to fit as the nominal thickness.

Check the hood and suit as one interface

The neck is designed to work with a BARE drysuit collar to resist flushing. Confirm that relationship with your exact suit rather than assuming that every drysuit collar creates the same overlap. A hood that fits the head still needs to sit correctly around the neck and suit.

BARE describes the Glideskin-in face and neck areas as trimmable. Any final adjustment should follow the manufacturer’s instructions for this hood and your suit. Check the unaltered fit first; the XS label does not establish that every wearer needs the same adjustment.

Lining, stretch and seam construction

The high-loft OMNIRED interior is the lining used in this model, while ELASTEK supplies the stretch outer fabric. Double-glued and blindstitched SECURELOCK seams join the hood.

Venting and mask-strap placement

The GEN2 vent is designed to let trapped air escape from the hood. A grip pad at the rear provides a contact area for the mask strap. Check that the hood opening, mask skirt and strap sit together without pulling the opening away from the face.

Choose the 7/5 mm dry-hood version and XS size together, and match the neck arrangement to the intended suit. The source’s 7/5 mm designation is retained rather than simplifying it to a uniformly 7 mm hood or treating another Ultrawarmth hood as identical.